Go to start of metadata

Requirements

Introduction

This feature allows you to print your own logo on the printouts. It was first implemented in custo diagnostic Starting with Custo Diagnostic 4.3.x x

Requirements

• The logo must be

...

• in BMP format
• Size: The height must not exceed 100 pixels, and the width must not exceed 300 pixels

...

Here is the edited version: Edited logo.bmp

• Starting from custo diagnostic 5.x you can use JPG and PNG
  
• Starting from custo diagnostic 5.10.11 the Printout will be printed with custo med logo as default

Settings

...

Drucken/Darstellung\PrintBitmapHeight	0					Height of the bitmap in

hundredsel units

hundredths of a unit, maximum 300 (0 = the height is calculated automatically: 100

bitmap

pixels correspond to 3 units).The width is adjusted accordingly.

In Reha, on the measurement table print page, due to a different layout, the logo is scaled to 5 (instead of 3) units in height.

Drucken/Darstellung\PrintBitmapPathHochFormat	leer					Bitmap including path, to be printed on the portrait-oriented print head
Drucken/Darstellung\PrintBitmapPathQuerFormat	leer					Bitmap

,

including path, to be printed on the landscape-

format

oriented print head
Drucken/Darstellung\PrintBitmapRightAligned	false

true :

false = The bitmap is printed

right

left-aligned at the

top edge, false :

print head true = The bitmap is printed

left

right-aligned at the

top edge

...

...