Introduction

This article describes the screen structure of the training overview page and gives hints on how to set the screen page for your own needs.

General

On the training overview page (also called "stripe display") all training places are always displayed simultaneously. If more than 8 training places are configured, the 2 screen is used for the display. The following information can be displayed simultaneously for all training patients:

Number of exercise station
Patient name
online ECG
two freely configurable information blocks
Training profile with HR curve

custo diagnostic 4.x > Training Overview page > 2018-04-17_12h02_14.png

Structure of a patient "strip"

Each patient is displayed with a "strip" on the overview page, this contains all relevant information about his training.

custo diagnostic 4.x > Training Overview page > 2018-04-17_12h03_46.png

Picture	Area name	Description
A	exercise station number	Here is only the number of the training area. This rectangle flashes red in case of an alarm.
B	Patient button	The current patient is always displayed on the patient button. If the button is pressed, the enlarged display of this training area is displayed, pressing the button again returns to the overview page. Patient key has its own configurable context menu, see Settings of the Context Menu
C	online ECG	In this area the current ECG of the patient is displayed. Depending on the setting, the ECG can also be displayed before patient selection. Online ECG has its own configurable context menu, see Settings of the Context Menu
D	information block right of ECG filed	Up to four configurable numerical values can be displayed simultaneously in the info block right of ECG field. See Information Block Settings
E	Exercise area and HR curve	In this coordinate system various curves of the training are displayed, The current ergometer training is displayed as an orange line, in a treadmill training the speed is shown in blue and the incline as a red curve. HF curve is displayed as a blue line. Exercise area has its own configurable context menu, see Settings of the Context Menu
F	information block right of Training filed	Up to four configurable numerical values can be displayed simultaneously in the info block right of training field. See Information Block Settings

User Actions on the Overview Page

The user actions on the overview page are divided and required according to their importance. With decreasing importance and frequency of user actions, they require more and more mouse clicks.

The most frequent and important user actions can be performed directly via one of the buttons on the overview page. These can therefore be called up with just one mouse click.
Further general functions are all summarized under the options menu, so you need two mouse clicks. Some of these can also be called directly using a function key
Important functions, the use of which is not always necessary, but must nevertheless be accessible in a fast way, can be found in the respective context menus, so this requires two mouse clicks.
To make it even easier for users to work on the overview page, a specific function can be selected for each of the context menus (ECG area and training area), which can be performed directly with just one mouse click. This is the fastest way to trigger a certain function/action, but there is no button on the overview page, so it must be noted/learned. Here it is advisable to select only function whose inadvertent triggering with a mouse click has no too big negative effect on the running training. For example, a freely defined mouse click should not start or stop the training, but rather call up a certain enlarged display page. How to customize mouse click action on ECG view and exercise view?

Buttons on the training overview page

Button	Bescription
Overwie	Switches back to the overview page
Allocation	Switches to the manual exercise allocation page
Start Group	Controls all patients simultaneously. This allows training start for all patients introduce the cool down phase for all patients finishing exercise for all patients
Options
Print	Calls the dialog for configuring automatic printing after the workout.
End	Exits this page

Context menus on overview page

The areas

Patient button
Online ECG
Exercise area

all have a special freely configurable context menu. The design can be

simplified
this is the (actory settings
professional
all menu items are available
each menu item can be activated or deactivated
This allows you to create special context menus adapted to your individual work.

Function keys on overview page

Each of the function keys is executed immediately when pressed, i.e. it does not necessarily have to be called via the options menu.

Function key

Description

F5

This key toggles between the classic content of the training area, i.e. the training- and HR-curve and the display of patient information. The display of the patient information is always displayed in the reddish background, so that the two display variants can easily be kept apart.

custo diagnostic 4.x > Training Overview page > image2018-4-23_15-32-30.png

F8

This key activates or deactivates the display of the F8 table. This table allows you to display additional numerical information about each of the exercising patients. The columns in the table can be individually configured, even during a training session, if necessary. In this table you can configure numerical displays that are of interest, but are not required immediately and always at first look on the overview page in the information blocks.
The table can also be used for quick entry of various numerical values of the patients.