Preconditions

custo router Hardware
custo router Firmware 20170303142702 (Image: "custopi-image-all-raspberrypi3-20170303142702.rootfs.rpi-sdimg")
custo diagnostic 4.6.0 (minimum)

How to build a custo router by your own you can read here.

Settings in the Service Center

Settings Name	Default Value	Comment
Geräte\Devices\VirtualRouterSIO\Active	false	If this value is set to true, the processes for the virtual SIO are displayed internally
Geräte\Devices\VirtualRouterSIO\VirtualSIOPort	4000	The port on which the TCP port handles serial communication
Geräte\Devices\VirtualRouterSIO\VirtualSIORouterHost		Hostname or IP address of the custo router
Geräte\Devices\VirtualRouterSIO\VirtualSIORouterPort	8090	Port under which the custo router is reachable.

Device Settings in custo diagnostic

com IR Settings:

If the custo router communication is activated, a "Search Virtual SIO" button will appear on the custo com IR setup page. After pressing this button, all virtual custo com IR Ports will appear as "Router SIO x" in the list.

custo diagnostic 4.x > Connect custo screen 300/400 Recorder via custo router to ABPM > image1.png

Currently, only one button is searched for an active custo router, the settings retain their validity, even if the router is switched off.

Recorder Settings:

Under ABPM (1) → Connection (2) → Device (3) activate 'custo screen 100/200/300/400' (4) and select as connection 'custo com IR' (5). The corresponding router port is then displayed as hardware

custo diagnostic 4.x > Connect custo screen 300/400 Recorder via custo router to ABPM > image2.png

For testing, all recorder information can be read on the recorder page:

custo diagnostic 4.x > Connect custo screen 300/400 Recorder via custo router to ABPM > image3.png