View Source

Standard the er2100 Treadmill is setup with the USB port activated
In case you would like to change this you have to follow the procedure below.

Warning!

In case you are making mistakes in this procedure the treadmill might up ending not working.

Setting up communication port of the er2100

To enter the terminal application of the communication interface module (CIM) from the treadmill, the following
procedure must be carried out:
Connect a USB- or straight serial cable to connect to the communication interface
module.
You can use a terminal tool such as HyperTerminal or Terra Term.
We use in our example Tera Term, the treadmill is connected to COM3 ( you can check for the correct COM port in the device manager of Windows)

Hardware > Changing communication port settings on er2100 > image2019-6-12_20-28-11.png

5. Setup the Terminal settings of the session.

Hardware > Changing communication port settings on er2100 > image2019-6-12_20-33-3.png

6. Set CR+LF for Transmit and Receive and Tag the box for local echo

Hardware > Changing communication port settings on er2100 > image2019-6-12_20-35-19.png

7. Setup the port settings

Hardware > Changing communication port settings on er2100 > image2019-6-13_7-51-37.png

8. Baud rate 57k6, Partity none, 8 bits, Stopbits 1 and flow control none

Hardware > Changing communication port settings on er2100 > image2019-6-13_7-53-55.png

9. Now switch on the treadmill and immediately press Ctrl + Break on the key board of the computer,

The treadmill returns the following information:

CIM 2.2.0
Sep 28 2018 09:05:01
Initializing service protocol.............................................................................................................................................................
Detecting type.Treadmill detected
Options:
1) Settings2) Service
Please select#>

10. Select settings, the first menu item allows you to select the USB or Serial port



1) Select communication port
(Current selection: 1)
1) USB
2) SERIAL
#>

11. Select the communication protocol

Select communication protocol
1) Lode Treadmill
2) Trackmaster
3) Woodway
4) HP Cosmos(backspace: back)
#>

12. Select the baud rate

Select baudrate:
(Current selection: 0)
0) Default
1) 56k6
2) 38k4
3) 19k2
4) 9600
5) 4800
6) 2400
(backspace: back)
#>

13. Select conversion Miles/hour to Kilometer/hour

Select in/out units:
(Current selection: 0)
0) Default
1) kmph/kmph
2) mph/mph
3) kmph/mph
4) mph/kmph
(Backspace: back)
#>


Save settings? (y/n)
(backspace: back)
#>y

Settings saved. Please restart device



14. After the settings have been saved the treadmill needs to be restarted to let the new settings take effect.