View Source

Some Components in custo diagnostic uses Training Devices (e.g. Ergometer, Treadmill) to perform an Examination.

Many of the existing Devices are known in custo diagnostic and can be selected by Name. If you want to connect a unknown Device its good to know which Control Protocol this Device is using. Sometimes a known Device with the same Control Protocol can be selected in custo diagnostic in representation of this unknown Device.

To make the Basic Configuration in custo diagnostic go to the apropriate Settings Page:

custo diagnostic 4.x > How to setup a Training Device - up to custo diagnostic 4.5.x > image2018-1-29_22-41-58.png

Configuration Ergometer:

A distinction is made between custo devices (custo OEM ergometer) and alternative devices

by Ergometer:

custo diagnostic 4.x > How to setup a Training Device - up to custo diagnostic 4.5.x > image2018-1-17_14-32-35.png

Configuration as an Example for Serial Connection:

custo diagnostic 4.x > How to setup a Training Device - up to custo diagnostic 4.5.x > image2018-1-17_14-42-10.png

for Point 2, see to the PC Interface and in the Device Manager from the Windows Operating System

by Treadmill:

custo diagnostic 4.x > How to setup a Training Device - up to custo diagnostic 4.5.x > image2018-1-17_14-31-45.png

Configuration as an Example:

custo diagnostic 4.x > How to setup a Training Device - up to custo diagnostic 4.5.x > image2018-1-17_14-49-29.png

for Point 2, see to the PC Interface and in the Device Manager from the Windows Operating System